Marantz SR6003 - Manual (Page 75)

72
ENGLISH
BASIC
CONNECTIONS
BASIC OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
ADV
ANCED
OPERA
TION
4. Repeat step 3. until the last number of the
macro is displayed.
• The display will return to step 1. .
• The each programmed operation is
transmitting when the number of the macro
is displayed.
5. To return the normal mode, press and hold
down the ENTER button until MACRO is
disappeared on the LCD.
EDITING MACROS
Macros may be edited using following procedure.
4.
2.
1.
3.
3.
1. Press and hold the MACRO and MENU button
until the LEARN, MACRO indicators and
MACRO are displayed blinking on the LCD.
2. Press the numeric button to be changed.
Let’s use the example of programmed MACRO
1, by pressing “1” button.
• LEARN, MACRO indicators and M1-01 is
displayed blinking.
3. Press the cursor button ( 3 or 4) to select the
number of macro to be edited.
• The programmed operation is displayed
after the number of macro is displayed.
• The number of macro can be changed with
the cursor button.
• To rewrite an existing macro step, simply
press function button and programed for the
new step. The old step will be erased and
rewritten with the new step.
• To insert a new step in between existing
steps in a macro, after step 3. press the
MEMO button, then press the button for the
new step. The numbers of the other steps will
be adjusted accordingly to accommodate
the new step. Since only 10 steps may be
stored in any macro, the tenth step will be
erased if an step is inserted when the total
number of steps is already 10.
• To erase a step in a macro, after step 3. call
up the number of the step to be erased and
press the CL button.
4. Press the ENTER button to return step 1.
5. To return the normal mode, press and hold
down the ENTER button until MACRO is
disappeared on the LCD.
USING MACROS
The following procedure will show how to use macro
buttons for which you have programmed macros.
1.
2.
1. Press the MACRO button
• MACRO indicator and MACRO is displayed
on the LCD.
2. Press the numeric button for programmed
number and send the programmed code step
by step.
↓
• The remote controller will do nothing if no
macros are programmed.
The macro steps are executed in order.
Also, the step numbers displayed on LCD
disappear as each step is executed.
3. After all macro commands have been
transmitted, the remote controller returns to
AMP in normal mode.
EXAMPLES OF MACRO PROGRAMS
Example 1
Change the input source for the unit to CD and play
the 3rd track on a CD in the CD player.
5.
4.
7.
2.
6.
7.
1.
1.
3.
3.
4.
5.
1. Press and hold the MACRO and SET button
until the LEARN, MACRO indicators and
MACRO are displayed blinking on the LCD.
2. Press the “1” button. M1-01 is displayed on the
LCD.