Marantz SR6003 User Manual

Page 66

Advertising
background image

63

ENGLISH

BASIC

CONNECTIONS

BASIC OPERA

TION

ADV

ANCED

CONNECTIONS

SETUP

ADV

ANCED

OPERA

TION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

ADV

ANCED

OPERA

TION

TEMPORARILY LISTENING TO A LOCKED CHANNEL

2.

3.

3.

2.

3.

1.

Tune to the locked channel you want to listen

to.

2.

Press

the

T-MODE button on the main unit or

the P.LOCK button on the remote controller.

3.

When [PASSWORD ****] appears, use the

cursor buttons on the main unit or remote
controller, or the numeric buttons on the remote
controller, to enter a password (4 digits), then
press the ENTER button on the main unit or
remote controller.

4.

When the correct password is entered,

[PASSWORD OK!] is displayed and you can
temporarily listen to the channel.

Note:

• You can cancel temporary listening by pressing the

EXIT button on the main unit or CL button on the
remote controller.

• Since the purpose is to listen temporarily to a

locked channel, lock status is restored if the channel
is changed, the function is changed, the power
is turned on/off, or any other such operation is
performed. If you want to release lock status, see
“Setting/Releasing Parental Lock.”

CHANGING THE PASSWORD

2.

6.

3. 4.

2.

3.

4.

6.

1.

Set to receive SIRIUS Satellite Radio.

2.

Press

the

T-MODE button on the main unit or

the P.LOCK button on the remote controller.

3.

When [PASSWORD ****] appears, use the

cursor buttons on the main unit or remote
controller, or the numeric button on the remote
controller, to enter a password (4 digits), then,
with the cursor located at the far right, press
the

2 cursor button on the main unit or remote

controller.

P A S W O R D 9 9 9 9

7 7 7 7 7

7 7 7

7 7 7

7 7

7 7 7 7 7

7 7 7

7 7 7

7 7

N E W W O R D _ _ _ _

4.

When [NEW WORD _ _ _ _] is displayed, enter

a new password, then press the ENTER button
on the main unit or remote controller.

W O R D C H A N G E D

5.

When [WORD CHANGED] is displayed, the

password has been changed.

6.

Press

the

EXIT button on the main unit or CL

button on the remote controller.

Note:

If the unit is reset the password will be reset to 9999.
(See page 77)

Advertising