Marantz SR6003 - Manual (Page 43)

ENGLISH
40
BASIC
CONNECTIONS
BASIC OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
SETUP
6 ACOUSTIC EQ
This display is for setting up the equalizer and
changing the Equalizer mode.
• Preset Graphic EQ Adjust :
“6-1 PRESET G. EQ ADJ” (see page 41)
• Check Auto EQ :
“6-2 CHECK AUTO” (see page 41)
EQ Mode:
There are 4 equalizer modes to choose from: Preset
Graphic EQ that allows the user to manually adjust
the equalizer, and Audyssey, Audyssey Front and
Audyssey Flat that automatically adjust the equalizer
from the measurement results of the Auto Setup
feature (see page 30).
Audyssey Front:
This mode matches the characteristics of each
speaker to those of the front speakers.
Audyssey Flat:
This mode fl attens the frequency characteristics of
all speakers. It is suited for playback of multichannel
music such as Dolby Digital and DTS.
Audyssey:
This mode adjusts the frequency characteristics
of all speakers so as to create the best listening
environment for the sound characteristics of the
listening room.
Preset:
This mode adjusts the graphic equalizer that was
set in Preset Graphic EQ Adjust to adjust the
characteristics of each speaker (see page 41).
Off:
The graphic equalizer is not used.
1. Select “Acoustic EQ” from Main Menu with the
3 or 4 cursor buttons and press the ENTER
button.
2. Select “EQ. Mode” with the 3 or 4 cursor
buttons.
3. Select “Audyssey Front”, “Audyssey Flat”,
“Audyssey”, “Preset” or “Off” with the 1 or 2
cursor buttons.
After you complete this portion of the setup, move the
cursor to “RETURN” with the
3 or 4 cursor buttons
and press the ENTER button.
To use the remote controller (RC003SR) to change
the EQ Mode, press the AMP button and press the
EQ button.
Each time this button is pressed, the EQ Mode
changes as follows.
Off Audyssey Front Audyssey Flat
Preset Audyssey
Notes:
• “Audyssey Front”, “Audyssey Flat” and “Audyssey”
can be selected after executing the Auto Setup feature.
• If a speaker that was determined “No” in Auto Setup
is manually turned on, the “Audyssey”, “Audyssey
Front” and “Audyssey Flat” modes cannot be
selected.
• The equalizer turns off when the Pure Direct mode,
Source Direct mode, Dolby Headphone or Virtual
mode is set.
• Acoustic EQ Modes are not used during playback
of Dolby TrueHD, Dolby Digital Plus, or DTS-HD
signals.
Even in this case, settings made using Speaker Auto
Setup (speaker yes/no, distance, size, channel level,
crossover) are enabled.
• Tone Control is disabled when an EQ Mode is in
use.
[dB]
[Hz]
[dB]
[Hz]
Acoustic EQ.
EQ. Mode
Preset Graphic EQ. Adjust
Check Auto EQ.
Return
: Up / Down : Change Enter : Exit : Exit
: Off
Preset Adjust
Reset
Channel
63Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
Return
: Up / Down : Change Enter : Exit : Exit
: Channel
: Front Left
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
63
+9dB
0dB
-9dB
-18dB
125 250 500 1k 2k 4k 8k 16k
Check Auto
EQ. Mode
Channel
63Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
Return
: Up / Down : Change Enter : Exit : Exit
: Audyssey
: Front Left
: -15.0dB
: -2.0dB
: -5.0dB
: +9.0dB
: +3.0dB
: -5.0dB
: -7.0dB
: -18.0dB
: -20.0dB
63
+9dB
0dB
-9dB
-18dB
125 250 500 1k 2k 4k 8k 16k