Marantz SR6003 User Manual
Page 42
ENGLISH
39
BASIC
CONNECTIONS
BASIC OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
SETUP
5-1 ZONE SETUP
The SR6003 has source selectors, sleep timers,
zonespeaker output, and remote controller for the
two other ZONEs in the ZONE system.
These features can be set from this menu.
1.
Select
“Preference” from the Main Menu
with the
3 or 4 cursor buttons and press the
ENTER button.
2.
Select
“Zone A Setup” or “Zone B Setup” with
the
3 or 4 cursor buttons.
3.
Press
the
ENTER button to enter the setting.
The following explanation shows how to operate
ZONE A of the ZONE system.
Zone A Setup
Audio Source
Sleep Timer
Stereo / Mono.
Zone Pre Out
Volume
Mode
Level
Zone Speaker Out
Volume
Mode
Level
Return
: Up / Down
: Change
Enter :
Exit : Exit
: DVD
: Off
: Stereo
: Off
: Variable
: -90dB
: * * *
: * * *
: * * *
The following explanation shows how to operate
ZONE B of the ZONE system.
Zone B Setup
Audio Source
Sleep Timer
Zone Digital Out
Return
: Up / Down
: Change
Enter :
Exit : Exit
: DVD(Dig.2)
: Off
: Off
4.
Select the desired item with the
3 or 4 cursor
button.
Audio Source:
Select the audio source of the ZONE output with
the
1 or 2 cursor buttons.
Sleep Timer:
The sleep mode is available when the ZONE is
active, set the time with
1 or 2 cursor buttons. The
sleep timer can be set to a maximum 120 minutes
in 10 minute increments.
Stereo / Mono: (Zone A only)
This mode switches audio output to the ZONE
system between Monaural and Stereo, using the
1 and 2 cursor buttons.
Zone Pre Out: (Zone A only)
Switch the zone pre out “On” or “Off” with the
1 or
2 cursor buttons.
Volume Mode: (Zone A only)
Select whether the zone pre out level is Variable or
Fixed with the
1 or 2 cursor buttons.
Level (Volume Level): (Zone A only)
Adjust the zone pre out level with the
1 or 2 cursor
buttons. The volume can be set between
-90 dB and 0 dB in 1 dB increments.
Zone Speaker Out: (Zone A only)
Switch the zone speaker out “On” or “Off” with the
1 or 2 cursor buttons.
Volume Mode: (Zone A only)
Select whether the zone speaker out level is
Variable or Fixed with the
1 or 2 cursor buttons.
Level (Volume Level): (Zone A only)
Adjust the zone speaker out level with the
1 or 2
cursor buttons. The volume can be set between
-90 dB and 0 dB in 1 dB increments.
Zone Digital Out: (Zone B only)
Switch the zone digital out “On” or “Off” with the
1
or
2 cursor buttons.
Note:
• Zone Speaker Out setting can be changed when the
Surround Back is set to “None” in the Speaker Size
menu and “SPEAKER C” is in the OFF position
on the rear panel. When this setting is unavailable,
“***” is displayed.
• If “Volume” is set to “Fixed”, the ZONE output
level cannot be adjusted from the ZONE A.
• Zone Speaker Out cannot be on the ZONE B.
• Functions other than ones that are set to either
DIGITAL IN 1-5 or F cannot be selected in ZONE
B. There are no MONO/ST, VOL, LEV or SPKR
settings for ZONE B.
• If Optical Output is set to Rec (See page 38), Zone B
functions cannot be used.
5-2 DC TRIGGER SETUP
This unit has a DC trigger control jack, which can be
used to link with input functions for the main ZONE
or ZONE A or ZONE B.
1.
Select
“Preference” from Main Menu with the
3 or 4 cursor buttons and press the ENTER
button.
2.
Select
“DC Trigger Setup” with the
3 or 4
cursor buttons.
3.
Press the ENTER button to enter the
selection.
DC Trigger Setup
Trigger
System Error!!
TV
DVD
VCR
DSS
AUX1
TAPE
CD/R
7.1ch Input / AUX2
Tuner
USB Audio
Return
: Up / Down
: Change
Enter :
Exit : Exit
: Disable
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
4.
You can select “Main Zone”, “Zone A”, “Zone
B”, “Remote” or “Disable” with the
1 or 2
cursor buttons.
Note:
• Remote is available for the external control. The
RC003SR cannot operate the function.
5.
Select desired input source with the
3 or 4
cursor buttons.
6.
Set
to
“On” or “Off” with the
1 or 2 cursor
buttons.
7.
After you complete this portion of the setup,
move the cursor to “Return” with the
3 or 4
cursor button and press the ENTER button.
Note:
• When an input source that is on in the set ZONE
is selected, voltage is output to the DC TRIGGER
output terminal.