Milan Technology MIL-SM2401M-STK - Manual (Page 161)

153
7-4-4. Port Controls
The Port Controls menu allows changing of port configurations.
State: User can disable or enable each port.
Negotiation: User can set auto negotiation mode for each port to Auto, Nway
(specify the speed/duplex on this port and enable auto-negotiation) or Force.
Speed: User can set 100Mbps or 10Mbps speed on Ports 1 to 24. User can
set 1000Mbps, 100Mbps or 10Mbps speed on Ports 25 and 26, depending on
module installed.
Duplex: User can set full-duplex or half-duplex mode for each port.
Flow control: User can set flow control function to enabled (ON) or disabled
(OFF) in Full Duplex mode.
Back Pressure: User can set back pressure to enabled (ON) or disabled (OFF)
in Half Duplex mode.