Milan Technology MIL-SM2401M-STK - Manual (Page 88)

80
6-3-5. VLAN Configuration
This page can set VLAN mode to port-based VLAN, 802.1Q VLAN or disable
VLAN function.
All ports are automatically placed in VLAN 1, the default VLAN. To create new
VLANs, use the Create a VLAN Group menu and add a VLAN. Make sure
when you enter a VLAN name you do not leave spaces. For example VLAN2
is correct; VLAN 2 will give an error. The VLAN name can be any 15
alphanumeric characters. Special characters are not allowed.
NOTE: When changes are made to the VLAN mode, it is recommended that the
device be rebooted to ensure system integrity.