Milan Technology MIL-SM2401M-STK - Manual (Page 92)

84
6-3-5-2. Create a VLAN Group
Create Port-Based VLAN
Select <Edit> to create a port-based VLAN and add member/nonmember ports
to it.
1. VLAN Name: Type a name for the new VLAN using 15 alphanumeric
characters and no spaces.
2. Group ID: Type the VLAN group ID. The group ID range is 1~4096.
3. Member: Press the Space key to choose VLAN member type.
There are two selections:
Member: The port is member port.
NO: The port is NOT member port.
4. Press “ESC” to return to the action menu line.
5. Select <Save> to save all configured values.
NOTE: If the trunk groups exist, it will be displayed (ex: TRK1, TRK2…) after
port26. The user can configure select if it is the member of the VLAN or not.