Milan Technology MIL-SM2401M-STK - Manual (Page 36)

28
5-2-2. Port Commands Set
Commands
Command
Level
Description Defaults Example
Use the fast Ethernet
interface
configuration
command
Switch (config)#
interface
fastEthernet 0/1
interface
[FastEthernet
/module
Ethernet] [slot
id] [id]
Interface
configuration
mode
Use the module
Ethernet interface
configuration
command
Switch (config)#
interface
moduleEthernet 1/1
Use the duplex
configuration
command to specify
the duplex mode of
operation for Fast
Ethernet.
Auto
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
duplex full
duplex [full | half|
auto]
Interface
configuration
mode
Use the duplex
configuration
command to specify
the duplex mode of
operation for module
Ethernet.
Auto
Switch (config)#
interface
moduleEthernet 1/1
Switch (config-if)#
duplex full