Milan Technology MIL-SM2401M-STK - Manual (Page 197)

189
7-4-14. Configuration Backup
7-4-14-1. TFTP Restore Configuration
Use this screen to set TFTP server IP address. You can restore EEPROM value
from here, but you must put the image back in the TFTP server. The switch will
download back flash image.
7-4-14-2. TFTP Configuration Backup
Use this screen to set the TFTP server IP address. You can save current
EEPROM value from here, then go to the TFTP Restore Configuration screen to
restore the EEPROM value.