Milan Technology MIL-SM2401M-STK - Manual (Page 193)

185
7-4-12. 802.1X
When the IEEE 802.1x function is enabled, the parameters may be configured
here.
7-4-12-1. System Configuration
Radius Server IP: Set the Radius Server IP address.
Server Port: Set the UDP destination port for authentication requests to the
specified Radius Server.
Accounting Port: Set the UDP destination port for accounting requests to the
specified Radius Server.
Shared Key: Set an encryption key for use during authentication sessions with
the specified radius server. This key must match the encryption key used on the
Radius Server.
NAS, Identifier: Set the identifier for the radius client.
Click the Apply button to save the System Configuration information.