Milan Technology MIL-SM2401M-STK - Manual (Page 186)

178
PathCost: Path Cost specifies the path cost of the port that the switch uses to
determine which ports are the forwarding ports. The lowest number
becomes the forwarding port. The range is 1-65535 and the default value is
based on IEEE802.1D.
10Mb/s = 50-600 100Mb/s = 10-60
The switch must be rebooted if the values are changed.
Port Priority: A change to the Port Priority affects which port will be the root
port. The lowest number has the highest priority. The range is 0-255 and the
default setting for all ports is 128. The switch must be rebooted if the values
are changed.
3. Click the Apply button to save the new configuration.