Milan Technology MIL-SM2401M-STK - Manual (Page 60)

52
5-2-10. Port Mirroring Commands Set
Commands
Command
Level
Description Defaults Example
port monitor
[RX|TX|Both
|Disable]
PortList
Or
no port monitor
Interface
configuration
mode
Use the port
monitor interface
configuration
command to
enable Switch
Port Analyzer
(SPAN) port
monitoring on a
port. Use the no
form of this
command to
return the port to
its default value.
N/A
Switch (config)#
Interface fastEthernet
0/8
Switch (config-if)# port
monitor both 3
show port
monitor
Interface
configuration
mode
Use the show port
monitor privileged
EXEC command
to display the
ports for which
Switched Port
Analyzer (SPAN)
port monitoring is
enabled.
Switch (config-if)#
show port monitor
State: ENABLE
AnalysisPortId: 8
Port 1 Rx: Monitor
Port 1 Rx: Monitor
Port 2 Rx:
Port 2 Rx:
Port 3 Rx: Monitor
Port 3 Rx: Monitor
Port 4 Rx:
Port 4 Rx:
Port 5 Rx:
Port 5 Rx:
Port 6 Rx: