Multi-Tech Systems ISIHP-2S - Manual (Page 23)

Software/Driver Installation (Windows 95)
MultiModemISI Hybrid Series, ISIHP-2S/2U 23
7. Close the Modems Properties dialog box. The message below
appears asking if you want to configure dial-up networking. Click
Yes.
8. The Remote Access Setup dialog box appears. Click Add.
9. Each COM port appears in a separate Add RAS Device dialog box.
To add the highlighted device, click OK.
10. The Remote Access Setup dialog box displays again. Repeat steps
7 and 8 until all devices are added.