Multi-Tech Systems ISIHP-2S - Manual (Page 49)

Software/Driver Installation
MultiModemISI Hybrid Series, ISIHP-2S/2U 49
17. To load the configuration, click Next in the Load Configuration
dialog box.
18. Then click Finish in the Configured dialog box.
19. The first TA now is configured. Click Back to return to the
Configuration dialog box and repeat steps 5 through 10 to
configure the remaining TA(s). If you install multiple ISIHP-2S/2U
in the same PC, you must configure two TAs per card installed. For
example, if you install four ISIHP-2S/2U cards in one PC, you
have to configure eight TAs (two per card).
20. After both TAs are configured, close the ISDN TA Configuration
utility and connect the to the network again.