Multi-Tech Systems ISIHP-2S - Manual (Page 26)

Software/Driver Installation (Windows 95)
26 MultiModemISI Hybrid Series, ISIHP-2S/2U
Removing ISIHP-2S/2U Card and Driver in Windows NT
3.51/4.0
1. Click Start, Settings, Control Panel, and then double-click
Network.
2. The Network dialog box appears. Click the Adapters tab.
3. Select Multi-Tech PCI ISI Card, and then click Remove.
Note: To complete an uninstall, reboot your system.
Installing the ISIHP-2S/2U in Windows 95 and Windows 98
This section describes how to install the ISIHP-2S/2U in systems
operating Microsoft Windows 95 or Windows 98 to use with a Remote
Access Service (RAS) server and other communications/fax server
type applications.
Windows 95 Installation
1. After installing the ISIHP-2S/2U in an available PCI slot, turn on
the computer.
2. Windows 95 automatically detects the ISIHP-2S/2U card. A dialog
box appears with a message stating that Windows has found the
new hardware and is locating the software for it.
3. The Update Device Driver dialog box appears. Insert the ISIHP-
2S/2U Windows 95 driver diskette and click Next.