Multi-Tech Systems ISIHP-2S - Manual (Page 9)

MultiModemISI Hybrid Series, ISIHP-2S/2U 9
Hardware Installation
NT1
Device
ISIHP
-2S
U Interface
S Interface
S/T Interface
ISDN line enters
building
Note: The ISIHP-2S/2U communicates over ISDN lines. If you
don’t have a standard modular jack near your computer, you
should install one or have one installed by your telephone
company. In the US, installation kits and adapters are available
wherever telephones are sold.
Note: The ISIHP-2S requires an S/T-interface. The ISDN phone
cord must be connected between the ISDN network connection and
the NT1 device.
10. Turn on power to the computer. Now you are ready to install
software.