Manitowoc Ice Q - Manual (Page 40)

Maintenance Section 4
4-4 Part Number 000001530
F. Remove the water pump.
• Disconnect the water pump power cord.
• Disconnect the hose from the pump outlet.
• Loosen the screws securing the pump mounting
bracket to the bulkhead.
• Lift the pump and bracket assembly off the screws.
• Remove water pump assembly from ice machine.Do
not soak the water pump motor in cleaner or sanitizer
solution
G. Remove the water trough
• Remove the quarter turn fasteners (turn
counterclockwise) securing the trough in place.
• Lift up and forward on the front of the water trough
while allowing the rear of the water trough to drop.
• Remove the water trough from the ice machine.
SV1456B
POWER
CORD
WATER
PUMP
LOOSEN
SCREWS
PUMP
OUTLET
DO NOT SOAK
WATER PUMP
MOTOR IN
CLEANER OR
SANITIZER
SOLUTIONS
SV1771B
REMOVE THE TWO
1/4 TURN FASTENERS
BY TURNING
COUNTERCLOCKWISE