Moyer Diebel MD-66 - Manual (Page 18)

10
Installation
Installing the Lower Spray arm Assembly
1. The lower spray arm assembly is
connected to the rear wall of the
wash tank.
2. The spray arm o-ring makes a
water-tight seal when the spray
arm is properly seated.
3. Slide the lower arm into place
making sure the spray arm is
fully back and contacting the
spray arm o-ring.
4. The spray pipes are supported on
each side by the spray arm
guides and will lock the spray arm
securely in place.
Spray Arm O-ring
Spray Arm Guide