Plate 10, Rack control module operation, Rcm status/jumpers – Moyer Diebel MD-66 User Manual
Page 94
86
Rack Control Module Operation
Jam Switch Activated while Dishwasher is In-cycle
Stop Switch Pressed while Dishwasher is In-cycle
Plate 9:
1. Doors closed.
2. POWER light ON.
3. RUN LIGHT OFF.
4. JAM SWITCH OFF.
5. Floats up.
6. Tanks full.
7. Tank heat Disabled.
8. Booster heat disabled.
9. Pumps and drive
disabled.
10. RCM timer stopped.
11. Start push button on
front panel must be
pressed to operate the
machine once the jam
is fixed.
RUN LIGHT ON.
JAM SWITCH ON.
Plate 10:
1. Door closed.
2. POWER light ON.
3. Floats up.
4. Tanks full.
5. Tank heat Disabled.
6. Booster heat disabled.
7. Pumps and drive
disabled.
8. RUN LIGHT OFF.
9. RCM timer stopped.
10. Automatic operation
stopped.
11. Start push button on
front panel must be
pressed to operate the
machine.
RUN LIGHT ON.
Rinse Flt L
Wa
sh Flt L
Wa
sh Flt U
Final Rinse
Rack Switch
Jam Switch
Table Limi
t
Stop
Start
Pause Power
DR Level Rinse Flt U
Prewash Flt L
Prewash Flt U
Run
H7
H5
H3
H1
H2
H4
H6
AA
Prewash
DR
Ta
nk
Rinse
Tank
Digital Display
Rinse
Reset
DR Pump
Pumps
Rinse Aid
Prewash Fill
Wash Fill
Final Rinse
Run Light
DR/Rinse Heat
Wash Heat
Booster Heat
RCM Status/Jumpers
NOT USED
NOT USED
NOT USED
NOT USED
= Indicator ON
= Indicator OFF
Activating the JAM Switch stops the
RCM timer and the machine stops.
The RUN LIGHT. The jam condition
must be fixed and the START
pushbutton must be pressed to
operate the dishwasher.
Rinse Flt L
Wa
sh Flt L
Wa
sh Flt U
Final Rinse
Rack Switch
Jam Switch
Table Limi
t
Stop
Start
Pause Power
DR Level Rinse Flt U
Prewash Flt L
Prewash Flt U
Run
H7
H5
H3
H1
H2
H4
H6
AA
Prewash
DR
Ta
nk
Rinse
Tank
Digital Display
Rinse
Reset
DR Pump
Pumps
Rinse Aid
Prewash Fill
Wash Fill
Final Rinse
Run Light
DR/Rinse Heat
Wash Heat
Booster Heat
RCM Status/Jumpers
NOT USED
NOT USED
NOT USED
NOT USED
= Indicator ON
= Indicator OFF
STOP light comes
on when pressed
and goes out when
it is released.