Moxa Technologies CP-104UL - Manual (Page 23)

Software Installation
Smartio CP-104UL User’s Manual 3-9
Installing the Driver
The following procedure shows how to install the CP-168U driver for the first time under
Windows 2000 and Windows XP. First make sure the board or boards have already been plugged
into the system’s PCI or PCI-X slot(s).
Windows 2000 Windows XP
1. Windows 2000 can auto-detect new devices,
and activate the Found New Hardware
function to install a device driver for Plug
and Play devices.
2. Click on Next to continue.
3. Select Search for a suitable driver… and
then click on Next to continue.
4. Select Specify a location and then click on
Next to continue.
1. Windows XP can auto-detect new devices,
and activate the Found New Hardware
function to install a device driver for Plug
and Play devices.
2. Select Install from a list or specific
location, click on Next to continue.
3. Checkmark Include this location in the
search, and then click on Browse. You
should locate the Software\Win2K-XP-2003
folder on the software CD. Click on Next to
continue.
4. Wait while the driver software is installed.