Moxa Technologies CP-104UL - Manual (Page 34)

3-20 Smartio CP-104UL User’s Manual
Install the Smartio Universal PCI or PCI
board in the system
Start Windows 95/98 to detect the board
Driver installed before? Yes
No
Install the driver from the driver CD.
See the section, “First Time Driver
Installation”
Configure the port.
See the section, “Port Configuration”
The Smartio CP-168U board’s ports
should be ready to work.
See the section, “Board and Ports Ready”
First Time Driver Installation
This stage gives the steps for installing the Smartio CP-168U board driver for the first time. The
installation of the Smartio CP-168U board for Windows 95 and Windows 98 are slightly different
and will be described in two columns. Follow the steps in the left column for Windows 95 or the
right column for Windows 98.
If one MOXA CP-168U board was previously installed and another MOXA CP-168U board is
plugged in, the system will prompt you to skip this stage, and take care of Port Configuration,
which is discussed in the next section.