Moxa Technologies CP-104UL - Manual (Page 27)

Software Installation
Smartio CP-104UL User’s Manual 3-13
14. After all files have been copied to the system,
the Completing the Found New Hardware
Wizard window will open to indicate that it
has finished installing “Port 0.” Click on
Finish to install the board’s second port.
15. Repeat the above procedure (Step 9 to Step
14) for the rest of the board’s ports. The last
window to open completes installation of
Port 7.
Finish to install the board’s second port.
13. Repeat the above procedure (Step7 to Step
12) for the rest of the board’s ports. The last
window to open completes installation of
Port 7.
How to Check the Installation
There are three ways to check the installation of the CP-168U Series board.
Device Manager
You can check the installation of the board by selecting Start " Settings " Control Panel "
System, select the Hardware tab, and then click on the Device Manager button.
Windows 2000 Windows XP