Booster function 22, Operation, Booster function – Miele KM5947 User Manual

Page 22

Advertising
background image

Booster function

The cooking zones are equipped with a
Single (I) or Twin (I/II) booster (see
Description of the appliance).

The booster function boosts power so
that large quantities can be quickly
heated, such as water for cooking
pasta. When Booster I is switched on,
the cooking zones operate for
10 minutes with extra power, and when
Booster II is used, for 15 minutes with
extra high power.

The booster function can only be used
on two cooking zones at a time, one on
the left and one on the right.

If the booster function is switched on
when

– no power setting has been selected,

the cooking zone will automatically
revert to setting 9 at the end of the
booster time or if the booster is
switched off before this.

– a power setting has been selected,

the cooking zone will automatically
revert to the pre-selected setting at
the end of the booster time or if the
booster is switched off before this.

If the cookware is removed from the
heat during the Booster time, the
Booster function is interrupted. If the
cookware is returned to the cooking
zone within 3 minutes, the Booster time
will resume.

In order to supply the Booster power
needed, another cooking zone will
operate at reduced power while the
Booster function is on. In other words,
the cooking zones are connected
(networked) in pairs, as shown here:

When the Booster is turned on, the
following takes place:

– any Automatic parboil is turned off in

the connected cooking zones.

– the power level in the connected

cooking zone may be reduced.

When Booster II is switched on, the
cooking zone associated with it is
switched off.

Operation

22

Advertising