Miele KM5947 - Manual (Page 26)

The timer can be used for two different
functions:
– setting a minute minder
– to set a cooking zone to switch off
automatically.
You can set times from 1 minute (
01) to
9
1
/
2
(
9.^) hours. For times of more than
99 minutes (
99) settings are made in
half-hour steps. Half hours are
represented by a dot following the
number.
Use the - sensor to reduce the time
from
9.^ to 00, and the + sensor to
increase the time from
00 to 9^. The
display stops at 2h and at 99. To
continue entering the setting, remove
your finger from the sensor and then
touch it again.
Once the set time has elapsed,
00 will
appear for several seconds in the timer
display, during which time a signal tone
will also sound. If you would like to
switch off the signal tone early, simply
touch the
m sensor.
Minute minder
Setting the minute minder
You can set the timer whether the
cooktop is switched on or off.
^ Touch the m, - or + sensor.
00 appears in the timer display and the
minute minder indicator lamp will flash.
^ While the indicator light is flashing,
touch the - or + sensors until the
desired amount of time appears, for
example 15 minutes.
The time set then counts down in
1-minute decrements. You can read the
remaining time from the timer display,
and adjust it at any time using - or +.
Deleting
^ Touch the - and + sensors at the
same time.
Timer
26