Miele KM5947 - Manual (Page 27)

Switching off a cooking zone
automatically
In order to be able to program the auto-
matic shut-off, you must first set the
cooking zone to a particular power
setting. All of the cooking zones can be
programmed at the same time.
If the time programmed is longer than
the maximum permissible operating
time, the cooking zone will switch off
when that time has been reached
(see the relevant section).
^ Begin as usual, by setting the
cooking zone - for example, the right
rear - to the desired power level.
^ Touch the m sensor.
00 appears in the timer display and the
minute minder indicator lamp will flash.
^ Touch the m sensor again.
The indicator light for the minute minder
in the timer display goes out and an
indicator light for the automatic
switch-off of a cooking zone flashes.
^ If more than one cooking zone is
switched on, touch the
m sensor
repeatedly until the indicator light for
that zone starts flashing (right rear).
The indicator lights for the cooking
zones in use light up clockwise, starting
with the front left.
^ Touch the - or + sensors until the
desired amount of time is displayed,
for example: 15 minutes.
The time set then counts down in
1-minute decrements. You can read the
remaining time from the timer display,
and adjust it at any time using - or +.
If you would like to set another cooking
zone to shut off automatically, simply
repeat the above steps.
If more than one shut-off time is
programmed, the shortest time
remaining is the one that appears in the
display, and the indicator light for that
cooking zone will flash. The other
indicator lights show a constant light. If
you would like to see the other
remaining times, keep touching the
m
sensor until the desired indicator light
flashes.
Timer
27