Miele KM5947 - Manual (Page 35)

You can change the programming of
your appliance (see Table).
^ With the cooktop switched off,
simultaneously touch the ON/OFF
cooktop sensor
s and the safety
lock sensor
$ until the indicator lamp
for the safety lock flashes.
A
P (Program) and an S (Status), each
with a number, appear in the cooking
zone display. They show the current
setting.
^ First select the desired Program by
touching the + or - sensors for the
front left cooking zone, and then by .
touching the + or - sensors of the
front right cooking zone, set the
desired Status (see Table). In this
way you can change several
programs one after the other.
To store the new settings in memory,
touch the ON/OFF cooktop sensor
s
until the displays go out. If you do not
wish to store the displays in memory,
touch the safety lock sensor
$ until the
displays go out.
Programming
35