Miele KM5947 - Manual (Page 25)

Switching off and Residual
heat indicator
Switching off a cooking zone
^ At the same time, tap the - and +
sensors.
0 will appear in the cooking zone
display for a few seconds. If the
cooking zone is still hot, the residual
heat will be indicated in the display.
Switching off the cooktop
^ Touch the ON/OFF sensor s.
This switches off all the cooking zones.
The heat indicator for each cooking
zone that is still hot appears in the
display.
The bars in the residual temperature
display gradually disappear as the
cooking zones cool down. The last bar
goes out when the cooking zones can
be touched again without danger.
The residual heat displays also react
when hot cookware is placed on a
cooking zone that is switched off.
If the residual heat displays are on,
do not touch the cooking zones or
place any heat-sensitive items on
them.
DANGER of burns and fire!
It is important to note that the
residual heat displays will NOT work
if there is a fault, even though the
cooking zones may still be hot.
Operation
25