Miele KM5947 - Manual (Page 30)

Stop and Go
Your appliance is equipped with a
feature which, when activated, enables
you to simultaneously reduce the power
levels of all active cooking zones to
level1. If you then de-activate the
feature, the cooking zones will
automatically return to their previous
level.
If the feature is not de-activated, the
cooktop will switch off after 1 hour.
If you wish to use this feature, you must
first alter the factory setting (see
"Programming").
If automatic switch-off is programmed
for a cooking zone, the time will be
interrupted when "Stop and Go" is
activated. When it is deactivated, the
time will resume running.
When stop and go is activated the
minute minder will continue running
without interruption.
Activation
^ Touch the $ sensor until you hear
two immediately consecutive signal
tones.
Take care not to touch the
$ sensor
too long, as this will activate the
safety lock.
The indicator light for the safety lock will
begin to flash. The power setting of the
cooking zones in use will be reduced to
1 and a
1 will appear in the related
cooking zone display..
Deactivation
^ Touch the $ sensor until the indicator
light goes out.
The cooking zones will continue to
operate at the last levels set.
Safety features
30