Miele WT 945 S WPS - Manual (Page 23)

Delay start
K Select Delay start
^ Press the Delay start button
repeatedly until the required delay
start period shows up in the display
(from
i to 9 hours).
Press the "START" button. The chosen
time will start to count down hour by
hour. The programme will then start
automatically.
To cancel "Delay start":
^ Press the Delay start button once
when 9 is showing in the display, or
^ Switch the machine off with the I-ON /
0-OFF button.
Memory function
If an additional option(s) is selected
for a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
When that particular programme is
chosen again, the display will show the
additional option(s) and / or spin speed
which have been stored for that
programme in the memory.
Exception: Delay start
L Start the programme
The START indicator lamp will flash as
soon as a programme can be started.
^ Press the START button.
After the programme has started the
START indicator lamp will light up
constantly.
At the end of a programme
A buzzer will sound (see
"Programmable functions") and the
anti-crease / Finish light will come on.
After washing a full load
If you have washed a full load of
laundry and you wish to dry the
laundry in the dryer afterwards you
will have to remove half the load.
Carry out the drying procedure in
two batches.
For further information on drying see
section "After each washing or drying
programme".
How to wash correctly
23