Miele WT 945 S WPS - Manual (Page 42)

Cleaning the filter in the water
inlet
The machine has a filter to protect the
water inlet valve.
The filter in the open end of the inlet
hose should be checked and cleaned
approx. every 6 months. It should also
be checked after an interruption to the
external water supply.
^ First turn off the stopcock.
^ Unscrew the threaded union
connecting the free end of the inlet
hose to the stopcock.
^ Remove the rubber seal 1 from the
recess.
^ Using pointed pliers, take hold of the
plastic filter 2 bar and remove.
^ Clean the plastic filter.
Put the filter and seal back in the
reverse order and reconnect the hose.
^ Make sure it goes on correctly and is
not cross-threaded.
^ Turn on the stopcock and check that
the connection is watertight. If water
drips out, tighten the connection.
Never forget to put the filter back in
place after cleaning.
Cleaning and care
42