Miele WT 945 S WPS - Manual (Page 70)

The programmable functions can be
used to tailor programmes to suit
your individual requirements. Once
activated the programmable
functions remain in memory until they
are deactivated.
High water level
This is useful where a higher quality
rinse is required.
It is available for the rinses in the
following wash programmes:
– COTTONS
– MINIMUM IRON
– QUICK WASH 40°C
Follow steps A to G to programme and
store in memory.
The programmable functions are
activated with the help of the additional
option buttons and the WASHING
programme selector.
Before you begin, first ensure that:
– the machine is switched off.
– the drum door is closed.
– the WASHING and DRYING
programme selectors are at the
Finish position.
A Press the additional option buttons
Soak and Pre-wash at the same time,
hold pressed in and . .
B . . . switch the machine on with the
I-ON / 0-OFF button.
C Then release these buttons.
– The Soak/Pre-wash and Washing
sequence indicator lamps will flash.
– A P will appear in the left of the
display.
D Turn the WASHING programme
selector to the Rinse out fluff position.
E The following will appear in the
display:
0 = Programmable function off
(de-activated)
or
i = Programmable function on
(active)
Press the START button to switch
between
0 to i activated or from
i to 0 deactivated.
F Switch the machine off with the I-ON
/ 0-OFF button.
The setting you have selected is now
stored in memory.
G Turn the WASHING programme
selector to the Finish position.
Programmable functions
70