Miele WT 945 S WPS - Manual (Page 45)

The wash programme stops and a fault indicator light comes
on.
Problem Possible cause Remedy
The Water inlet/drain
indicator lamp is
flashing and the load in
the machine has not
been washed. The water inlet system
is blocked. – Turn the programme
selectors to
Finish .
– Open the stopcock.
– Select and start the
programme again.
The Water inlet/drain
indicator lamp is
flashing. There is a blockage in
the water outlet. – Clean the fluff filter and
the drain pump.
– Has the drain hose been
fitted too high? Maximum
delivery head 1.00 m.
The Waterproof system
has reacted. – Call the Miele Service
department.
The Final spin indicator
lamp is flashing in the
programme sequence
display. The final spin has not
taken place. The
machine detected an
imbalance. – Loosen the laundry.
– Turn the WASHING
programme selector to
Spin .
– Make sure you select an
appropriate spin speed
for the type of load.
Problem solving guide
45