Miele WT 945 S WPS - Manual (Page 39)

Safety lock
Electronic programme locking (the
Locked indicator lamp is on)
prevents the door from being opened
or the programme cancelled during a
programme.
– The Anti-crease/Finish lamp flashes
to show that an attempt has been
made to alter a programme. This has
no effect on the programme
sequence.
– The locking function is switched off
at the end of the programme, during
"Rinse hold" and after the appliance
has been switched off.
Engaging the safety lock
^ Select a programme.
^ Press the START button until the
Locked indicator lamp comes on.
– The safety lock has been activated.
– The machine will not accept any
changes to the programme and the
programme will proceed to the end.
To de-activate the safety lock
^ Press the START button until the
Locked indicator lamp goes out.
Or, if the Anti-crease / Finish indicator is
flashing:
^ Select the programme originally
selected, and press the START
button until the
Locked indicator
lamp goes out.
Safety lock
39