Miele WT 945 S WPS - Manual (Page 58)

Removing the transit fitting
A Turn the left-hand transit bar 90°.
B Turn the right-hand transit bar 90°.
C Withdraw the two bars together with
the support plate.
D Plug the holes with the plastic caps
supplied.
The machine must not be moved
without the transit fitting in place.
Store the transit fitting in a safe
place for future use. It must be
re-fitted if the machine is to be
moved again (e.g. when moving
house).
Re-fitting is carried out by reversing the
procedure.
Installation and connection
58