Moxa Technologies Moxa Smartio C168H - Manual (Page 15)

Hardware Installation
Smartio C168H/PCI User’s Manual 2-3
Opt8A/Opt8B/Opt8S
Hold one end of the DB62 cable and plug it into the DB62 connector on the bracket
of the Smartio C168H/PCI. Carefully screw it until it is tight. Then plug the other
end of the cable to the RS-232 connection box's DB62 connector. Both ends of the
cable are identical.
1
2
3
4
5
6
7
8
T
x R
x
Opt8A/Opt8B/Opt8S
Smartio C168H/PCI
Opt8C/Opt8D
Hold one end of the DB62 cable and plug it into the DB62 connector on the bracket
of the Smartio C168H/PCI. Screw it carefully until it fits.
P1 P2 P3 P4
P6 P5 P7 P8
Opt8C/Opt8D
Smartio C168H/PCI