Moxa Technologies Moxa Smartio C168H - Manual (Page 24)

3-6 Smartio C168H/PCI User’s Manual
18. Click [OK] button in Moxa Smartio/Industio Configuration Panel to return
to Network dialog box.
19. Click [OK] button in to exit Network dialog box.
20. Restart the PC.
Note! The driver configuration will NOT take effect until you restart the
PC.
Note! Double check if all the Smartio C168H/PCI components – the
control board and one of the connection options – are connected
and fastened tightly to make sure that the system and the driver
start successfully.
Once the system restarts, you may check the event log issued by the MOXA
driver to see if the ports of the board are initialized successfully.
21. Enter the [Administrative] group, click [Event Viewer] icon and select [Log]
and [System] to check a message similar to “MOXA C168PCI series, with
first serial port COM3, has been enabled” for each configured board.