Moxa Technologies Moxa Smartio C168H - Manual (Page 33)

Software Installation
Smartio C168H/PCI User’s Manual 3-15
First Time Driver Installation Stage
This stage presents the steps for installing the driver for the first time of the first
Smartio C168H/PCI board. The installation of the Smartio C168H/PCI board for
Windows 95 and Windows 98 are slightly different and will be described in two
columns. Follow the steps in the left column for Windows 95 or the right column
for Windows 98 respectively.
If one MOXA C168H/PCI board had been previously installed and another MOXA
C168H/PCI board was plugged, the system will prompt you to do Port
Configuration Stage discussed in the next section and skips this stage.
1. Upon detecting the first new S
Sm maarrttiioo C168H/PCI board, Windows 95/98
will automatically display a New hardware found message box, and then pop
up the following dialog boxes. Click Next button.
Windows 95
2. Click [Other Locations] button.
Windows 98
2. Select [Display a list...] and click Next button.