Maytag T2 - Manual (Page 8)

7
If any pad is pressed when Control Lock
is activated, OFF will appear in the dis-
play for 15 seconds.
TO RESTORE: Press and hold the
Control Lock pad for several seconds.
The indicator word OFF will disappear.
SETTING THE CLOCK
1. Press Clock pad.
➢ The indicator word TIME will flash
in the display.
2. Press the appropriate number pads
until the correct time of day appears in
the display.
When electrical power is supplied or after
a power interruption, the last clock time
before power was interrupted will flash.
To recall the time of day when another
time function is showing, press the Clock
pad.
Clock time cannot be changed when the
oven has been programmed for clock
controlled cooking, self-clean or delayed
self-clean.
SETTING THE TIMER
Use to set and then signal the completion
of a time period up to 99 hours and 59
minutes (99:59).
The timer can be used independently of
any other oven activity and can be set
while another oven function is operating.
THE TIMER DOES NOT CONTROL THE
OVEN.
1. Press Timer pad.
➢ The indicator word TIMER will
flash and “0HR:00” appears in the
display.
2. Press the appropriate number pads
until the desired number of minutes or
hours and minutes appear in the dis-
play.
Example: To set the Timer for 5 min-
utes, press the Timer pad and the
3. The last minute of the countdown will
be displayed as seconds.
4. At the end of the time set, one long
beep will sound and “End” will appear
in the display. To change the number
of timer reminder signals, see below.
TO CANCEL:
1. Press and hold Timer pad for several
seconds. The time of day will reap-
pear.
OR
2. Press the Timer pad and the “0” num-
ber pad. After a slight delay the time
of day will reappear.
NOTE: Pressing CANCEL pad to cancel
the timer will cancel ALL selected oven
functions except the timer.
Control Options
TIMER BEEPS
You have a choice of three “end of
timer” reminder signals:
Option 1: One beep at the end of the
timer operation, then, one beep every 30
seconds for the next five minutes or until
the CANCEL pad is pressed.
Option 2: One beep at the end of the
timer operation, then, one beep every
minute for the next 12 hours or until the
CANCEL pad is pressed.
Option 3 (default option): One beep at
the end of the timer operation, then, no
other beeps.
SETTING THE TIMER BEEPS:
1. Press the Timer and CANCEL pads
at the same time and hold for several
seconds.
➢ A single beep will sound.
➢ Display will show the indicator word
TIMER and the current option – 1,
2 or 3.
2. Press the appropriate number pad (1,
2 or 3) to select the option you wish.
The current time of day will reappear
in the display after four seconds.
CLOCK CONTROLLED
OVEN COOKING BEEPS
You have a choice of three “end of
timed cook” reminder signals for pro-
grammed cooking:
Option 1 (default option): Four beeps
at the end of cooking then, one beep
every 30 seconds for the next five min-
utes or until the CANCEL pad is pressed.
Option 2: Four beeps at the end of
cooking, then, one beep every minute for
the next 12 hours or until the CANCEL
pad is pressed.
Option 3: Four beeps at the end of
cooking, then, no other beeps.
SETTING CLOCK CONTROLLED
OVEN COOKING BEEPS:
1. Press Cook Time and CANCEL pads
at the same time and hold for several
seconds.
➢ A single beep will sound.
➢ Display will show the indicator word
COOK and the current option – 1, 2
or 3.
LOCK
0 :05
BAKE
HR
DELAY COOK STOP TIMER CLEAN ROAST BROIL
LOCK
1 :30
BAKE
HR
DELAY COOK STOP TIMER CLEAN ROAST BROIL
OVEN COOKING,
CONT.
number 5 pad. The control will begin
countdown after a four second delay.
Example: To set the Timer for 1 hour
and 30 minutes, press the Timer pad
and the numbers 1,3,0 pads. The con-
trol will begin countdown after a four
second delay.