Magellan 330 Series - Manual (Page 47)

35 Magellan MAP 330 GPS Receiver
Reference Reference
Customizing the Data Fields — Allows you to change the data that is
being display to 1 of 13 data options (bearing, distance, speed, heading,
VMG, CTS, ETA, ETE, XTE, turn, elevation, time, or date) for any of
the four fields. (See explanation of Data Types in the Map Screen
section.)
From the
Large Data
Screen
MENU ENTER
ENTER
ENTER Highlight
Customize
Use arrows to
highlight the title
for the data field to
be changed
Use arrows to
select new
data type
The Position screens 1 and 2 display your present position using the coordinate
systems that you have selected in Setup. The Position 1 screen shows all of the
basic position, time and satellite information on one screen. In addition, current
navigation information is shown in the bottom half of the screen.
Selecting the Position Screen — Use the Left or Right arrows to switch
between the two position screens. This allows the same position to be
displayed in different coordinate systems. This is useful when
comparing navigation data between devices and charts that use different
coordinate systems.
You can change the coordinate system displayed by following the
instructions in Setup - Selecting the Coordinate System.
Resetting the Trip Odometer — Resets the trip odometer to 0000.00.
From the
Position
Screen
MENU ENTER ENTER Highlight
Reset Trip
Confirm?
Yes or No