Magellan 330 Series - Manual (Page 51)

39 Magellan MAP 330 GPS Receiver
Reference
Accessing Waypoints in the Database — All stored waypoints, whether
user-input or preloaded, can be found in the Waypoint Database. You
will need to access waypoints in the database whenever you are editing
waypoints, activating a GOTO route or creating a multileg route.
From
Any
Screen
MENU ENTER Highlight
Database
Use up/down
arrows to select
category
ENTER Use left/right
arrows to select
“Find By”
Selecting Waypoints from the Nearest List.
If Near Position is selected as the “Find By”
option for the database or if User was selected as
the category, you will be presented with a list of
waypoints that you can choose from. The
information at the bottom of the screen
indicates the bearing and distance to the
highlighted waypoint from your present
position.
ENTER Use up/down
arrows to highlight
waypoint
Selecting Waypoints from the Alphabetical List.
If Alphabetical is selected as the “Find By” option
for the database a slightly different screen from the
Nearest list is displayed. Since this list can be
quite extensive, a “quick-find” box is added at the
top of the display to speed up the search. The
information at the bottom of the screen indicates
the bearing and distance to the highlighted
waypoint from your present position or cursor if
in the Cursor Mode.
Note: When selecting the User category, the MAP 330 does not use the
list with the “Quick-Find” box.