Magellan 330 Series - Manual (Page 64)

52 Magellan MAP 330 GPS Receiver
Reference Reference
Turning NAV Screens On/Off — Allows you to turn off or on any of the
navigation screens you choose.
From
Any
Screen
MENU ENTER Highlight
Setup
Sat Status
On/Off
ENTER
ENTER
Highlight
Nav Screens
Compass
On/Off
ENTER Large Font
On/Off
ENTER
Position
On/Off
ENTER
(Note: you must go through the entire sequence of nav screens for your
selections to be saved. As an example, if you turn the Sat Status screen
off and press ESC before confirming all of the nav screens, your
selection will not be saved and the Sat Status screen will still be on.)
Default: All On
Selecting the Coordinate System — Allows you to set the coordinate
system that will be used to display the position for the primary or
secondary position screen. Available coordinate systems are: Lat/Lon,
UTM, OSGB, Irish, Swiss, Swedish, Finnish, German, French, or User
Grid.
From
Any
Screen
MENU ENTER Highlight
Setup
ENTER Highlight
Coord System
The coordinate system you select
may require additional
information.
Select Primary or
Secondary
ENTER Select Coordinate
System
ENTER
Default: Primary - Lat/Lon DEG.MIN.MMM
Secondary - UTM