Magellan 330 Series - Manual (Page 52)

40 Magellan MAP 330 GPS Receiver
Reference Reference
Selecting Waypoints Nearest to the Cursor. As discussed in the Map
Screen section, the Map Screen has two modes of operation, position
and cursor. If you are in the cursor mode you may want to know what
waypoints are near your cursor rather than the ones nearest to your
present position. You can do this by selecting the “Find By” option of
Near Cursor. You are then presented with a list of waypoints that are
close to the cursor for the category you selected.
After the list is presented, you can use the Up/Down arrows to highlight
a waypoint, and press ENTER to view information on it. When
highlighting a waypoint, the bearing and distance from the cursor to the
waypoint is displayed at the bottom of the list.
Note: The “Find By” option Near Cursor is only available when the
Map screen is in the Cursor Mode.
ENTER
Scroll Quick-Find
Box
Changes character
Moves cursor left/right
Moves cursor from “Quick-
Find” box to highlight
waypoints in list
1
2
Access Waypoint
List
While waypoint list is
highlighted, you can return to
the “Quick-Find” box by
pressing ESC. ESC
3
Select
Waypoint
Moves highlight up/down
ENTER Selects highlighted waypoint
Moves name left or right to display
long names. Also displays
population if applicable.