Magellan 330 Series - Manual (Page 49)

37 Magellan MAP 330 GPS Receiver
Reference Reference
Customizing the Data Fields — Allows you to change the data that is
being displayed to 1 of 13 data options (bearing, distance, speed,
heading, VMG, CTS, ETA, ETE, XTE, turn, elevation, time, or date)
for any of the two fields. (See explanation of Data Types in the Map
Screen section.)
From the
Position
Screen
MENU ENTER
ENTER
ENTER Highlight
Customize
Use arrows to
highlight the title
for the data field to
be changed
Use arrows to
select new
data type
GPS Status Messages — Messages indicating the status of the GPS receiver
section of the MAP 330 are displayed on the Position screen.
Message Description
Searching - 1st sat Searching for 1st satellite.
Searching - 2nd sat 1st satellite found; searching for 2nd satellite
Searching - 3rd sat Two satellites are being tracked and searching
for a third.
Searching - 4th sat Three satellites are being tracked and searching
for the fourth.
Collecting Data All satellites needed for position fix are being
tracked and position is being computed.
Averaging MAP 330 is computing fixes; speed is near 0.0
so position is being averaged.
EPE xxft Estimated Position Error in feet. MAP 330 is
computing fixes while moving.
DGPS Computed fixes are being differentially
corrected.
Since the MAP 330 is a 12-channel receiver, once the first
satellite is found, finding the remaining satellites and
computing a fix may take only a few seconds.