Magellan 330 Series - Manual (Page 53)

41 Magellan MAP 330 GPS Receiver
Reference
Saving Present Position as a Waypoint — Creates and stores your present
position into the memory of the MAP 330. Stored waypoints can be
used in GOTO and route creation. While saving the waypoint, you can
edit the icon, name and add a message or you can just save the waypoint
using the default name supplied by the MAP 330.
From
Any
Screen
ENTER
MARK
Hold down
for 2-3
seconds
Modify
(see
Note)
(Note: To modify the icon, name or message use the Up/Down arrows
to highlight the field you wish to change and press ENTER. You are
then placed into the Edit Mode. Using the method described in
“Getting Started” you can personalize the waypoint, making it easy to
remember what it is.)
Creating New Waypoint Manually — Allows the creation of a new
waypoint with coordinates other than your present position. The
coordinates for the new position need to be entered manually.
From
Any
Screen
ENTER
MARK
Hold down
for 2-3
seconds
Modify
(see
Note)
Highlight
Location
Field
Edit Line 1 of
the Location
Field
ENTER
Edit Line 2 of
the Location
Field
ENTER Edit
Elevation
Field
ENTER
Highlight
“Save”
Button
ENTER
(Note: To modify the icon, name or message use the Up/Down arrows
to highlight the field you wish to change and press ENTER. You are
then placed into the Edit Mode.)
Creating New Waypoint with Map Cursor — Provides a method of
creating a new waypoint with coordinates other than your present
position. The new coordinates are computed automatically based on the
location of the map cursor.