Motorola TMS320C6711D - Manual (Page 28)

TMS320C6711D
FLOATINGĆPOINT DIGITAL SIGNAL PROCESSOR
SPRS292A − OCTOBER 2005 − REVISED NOVEMBER 2005
28 POST OFFICE BOX 1443
•
HOUSTON, TEXAS 77251−1443
Terminal Functions (Continued)
SIGNAL
PIN
NO.
TYPE†
IPD/
‡
DESCRIPTION
SIGNAL
NAME GDP/
ZDP
TYPE†
IPD/
IPU‡
DESCRIPTION
EMIF − ADDRESS¶
EA21 U18
EA20 Y18
EA19 W17
EA18 Y16
EA17 V16
EA16 Y15
EA15 W15
EA14 Y14
EA13 W14
EA12 V14
O/Z IPU EMIF external address
EA11 W13
O/Z IPU EMIF external address
EA10 V10
EA9 Y9
EA8 V9
EA7 Y8
EA6 W8
EA5 V8
EA4 W7
EA3 V7
EA2 Y6
EMIF − DATA¶
ED31 N3
ED30 P3
ED29 P2
ED28 P1
ED27 R2
ED26 R3
ED25 T2 I/O/Z IPU External data
ED24 T1
I/O/Z IPU External data
ED23 U3
ED22 U1
ED21 U2
ED20 V1
ED19 V2
† I = Input, O = Output, Z = High impedance, S = Supply voltage, GND = Ground, A = Analog signal (PLL Filter)
‡ IPD = Internal pulldown, IPU = Internal pullup. [To oppose the supply rail on these IPD/IPU signal pins, use external pullup or pulldown resistors
no greater than 4.4 k Ω and 2.0 k Ω , respectively.]
¶ To maintain signal integrity for the EMIF signals, serial termination resistors should be inserted into all EMIF output signal lines.