Marantz CDR310 - Manual (Page 10)

2
ENGLISH
Introduction
Thank you for purchasing this CDR310 CD Recorder.
Before using the CD recorder, make sure that you read
through this instruction manual carefully to fully understand
the device’s functions and how to operate them. We hope
that you will continue to enjoy using the recorder for a very
long time. After reading this manual, please keep it in a safe,
easy to reach place for future reference.
Features
● You can record digital audio from an external microphone,
internal microphone or line input onto the internal HD
(Hard Disk), and then burn the audio onto a CD-R.
● Audio input
• Condenser microphone or dynamic microphone (XLR
balanced input) connected to the MIC IN jack
• Internal microphone
• Line level audio source connected to the LINE IN jack
• Digital input (Coaxial input)
• Phantom power supply
• L/R independent attenuator for external microphone
input
● 4 different types of recording format
(MP3, WAVE, CD-DA, AIFF)
• Compressed sound recording uses MPEG1 Layer III
(MP3) monaural and stereo recording.
• MP3 are compressed to 128kbps (stereo) or 64kbps
(monaural).
• Non-compressed sound recording uses 16-bit linear
pulse code modulation (PCM).
● Simple recording
• You can start simple recording to the HD just by pressing
the REC button once. The HD capacity is approximately
3 Gig Bytes. (Approximately 5 hours in PCM stereo
recording)
● You can create an extended play recorded CD (maximum
25 hours 29 minutes on a 700MB CD-R disc in MP3 mono
format).
● Simple CD creation
• You can burn data recorded on the HD onto a CD-R just
by pressing the MAKE CD button.
● Convenient special recording functions
• Pre-code cache (
☞
P.29)
• Background recording (
☞
P.30)
• Silent skip (
☞
P.31)
• Auto track (
☞
P.33)
• Manual track (
☞
P.32)
● Recording level and LR balance adjustment (
☞
P.25)
• Automatic recording level control (ALC)
• Manual control
● You can record and playback audio in stereo (2 channel)
or monaural (1 channel).
● You can play back CD-DA and Data CD (MP3, AIF, WAV).
● The following sound outputs are available.
• Internal speakers
• Headphones connected to the headphone (PHONES)
jack
• Amp or other analog audio devices connected to the
LINE OUT jack.
• Digital output
● 2 types of power supply source
• Use the provided AC adaptor.
• Use alkaline batteries, the optional Nickel-Cadmium
battery (RB1100), or the optional Nickel-Metal Hydride
battery (RB1651).