Marantz CDR310 - Manual (Page 44)

36
ENGLISH
CD Split
When copying the HD data to CD-R disc, the copy method for
the final track when all of the data will not fit onto 1 CD is set
in the CD Split function.
• CD Split On Setting
This setting uses all of the unused space on a CD-R disc
to save data.
This enables the effective use of disc space, and reduces
the number of discs required. Also, when creating a CD
with data from a meeting, etc., a 30 second overlap of the
beginning and end contents is burned to make it easier to
understand the context.
002.wav 001.wav 003.wav HD Data
First CD-R
Second CD-R
30 sec of overlap
Track 1 Track 2
Track 1 Track 2
If track 001 and only part of track 002 can be saved to
the first CD-R as shown in the diagram above, track 001
and part of track 002 are saved to the first disc. Then,
the remainder of track 002 that could not be saved onto
the first disc is saved onto the second disc, starting 30
seconds before the track cut off on the first disc.
• CD Split Off Setting
The final track that could not fit onto the first CD-R is not
saved to the first CD-R, but is saved from the beginning of
the track onto the second CD-R.
Unused space remains on the disc, but it is easier to play
back these tracks because only complete tracks exist on
the same disc.
If a track with a file size larger than the capacity of the disc
is being burned to disc, CD Split Off becomes invalid, and
the track is cut midway.
If the file size of the next track is small, CD Split Off
becomes valid again.
002.wav 001.wav 003.wav HD Data
First CD-R
Second CD-R
Track 1
Track 1 Track 2
If only track 001 and part of track 002 can be saved onto
the first CD-R as shown in the diagram above, track 001 is
saved onto the first CD-R, and track 002 is saved from the
start onto the second CD-R.
It is convenient to use auto track. (
☞
P.33)
Creating tracks with the desired time interval increases the
efficiency with which discs are used.
If you do not wish to create many tracks, you can create a
disc with one CD-sized track by setting the capacity of the
disc being used.
< Default value > Preset1 : On
Preset2 : On
Preset3 : On
1
While the recorder is stopped, press the MENU/STORE
button.
2
Turn the JOG to select “Preset” and press the JOG .
3
Turn the JOG to select the preset number that you wish to
set, and press the JOG .
4
Turn the JOG to select “CD Split” and press the JOG .
5
Turn the JOG to select function On/Off, and press the
JOG .
6
Press the MENU/STORE button to register the settings.