Marantz CDR310 - Manual (Page 42)

34
ENGLISH
CD Burning
You can easily burn all of the data recorded on the HD onto
a CD-R with this recorder. You cannot specify particular data
on the HD for burning onto a CD-R. After burning onto the
CD-R, all of the data is erased from the HD.
Notes
• Do not attempt to playback or burn a CD while the recorder
is on a slant, standing on its edge, or on an unstable
surface.
• Do not move or carry the recorder while a CD is inserted
and operating. Doing so may cause damage to the
inserted CD.
1
Insert a CD-R disc into the recorder’s CD slot.
Notes
• Use CD-R discs that are compatible with the recorder. (
☞
P.5)
• Also, if all of the data will not fit onto one CD-R disc, the
copy method for the final track can be set in [CD Split] in
the preset menu. (
☞
P.36)
2
While the recorder is stopped, press the MAKE CD
button.
• A confirmation message to perform CD burning is
displayed.
3
Press the MAKE CD button again to start burning all of
the HD data onto a CD-R.
• The progress status is shown in the lower character
display section.
The display is a 10-figure display, with one figure
representing 10%.
• Press the CANCEL button to cancel CD creation.
4
When CD burning is completed, the CD-R disc is
automatically ejected from the CD slot.
If all of the HD data did not fit onto 1 CD-R disc, “Insert
CD” message is displayed.
(Displayed when 2 discs are required)
5
To continue recording the remaining HD data to CD-R,
insert the second CD-R disc into the recorder.
• When the CD-R disc is inserted, the recorder starts
burning HD data to the CD-R again.
• When CD burning is completed, “Complete” is displayed
for 3 seconds, and the CD-R disc is automatically
ejected from the CD slot.
• When CD creation is fully completed, “MoreCopy?” is
displayed.
If you select No when “MoreCopy?” is displayed, the
display switches to “HD Clear”.
If you wish to format the HD, select YES.
If you wish to create another CD, select No. The display
returns to “MoreCopy?”.