Marantz CDR310 - Manual (Page 35)

27
ENGLISH
Microphone attenuator
Set the attenuator function for external microphone input and
internal microphone input.
For external microphone input, set this function when using
microphones that have different sensitivity levels. The
attenuator function for the external microphone can be set for
the L/R sides respectively.
For internal microphone input, set this function when the input
sensitivity is too high.
• Attenuator OFF (0dB)
No microphone level attenuation.
• Attenuator ON (-20dB)
The input signal from either the microphone connected to
the MIC IN jack or the internal microphone is attenuated
by -20dB.
< Default value > Preset1 : Off
Preset2 : Off
Preset3 : Off
1
While the recorder is stopped, press the MENU/STORE
button.
2
Turn the JOG to select “Preset” and press the JOG .
3
Turn the JOG to select the preset number that you wish to
set, and press the JOG .
4
Turn the JOG to select the microphone attenuator
selection (“MIC-ATT-L”, “MIC-ATT-R”, “IntMicATT”) that
you want to set in the preset menu, and press the
JOG .
Preset menu Menu contents
MIC-ATT-L External microphone L Channel
MIC-ATT-R External microphone R Channel
IntMicATT Internal microphone
5
5 Turn the JOG to select function On/Off, and press the
JOG .
6
Press the MENU/STORE button to register the settings.