Marantz CDR310 - Manual (Page 19)

11
ENGLISH
Preparations Before Use
AC adaptor connection
When using the recorder with the provided AC adaptor, follow
the procedure below to connect the AC adaptor.
If you wish to use batteries, please refer to the [Using
batteries] section. (
☞
P.11)
Notes
Only use the AC adaptor that is provided with the recorder.
Running the recorder on DC power without using the
provided AC adaptor will cause damage to the recorder.
1
Connect the plug of AC power pack into the DC IN jack on
the recorder.
2
Connect the Power cord to a regular household plug
socket.
DC IN jack
AC power pack
Power cord
Notes
If a optional rechargeable battery is inside the recorder, the
battery will be recharged in this state.
Using batteries
If you wish to run the recorder on battery power, follow the
procedure below to install batteries into the provided battery
holder, and insert the holder into the recorder.
The following types of battery can be used.
● Alkaline batteries
● Optional Nickel-Cadmium battery (option: parts number
RB1100)
● Optional Nickel-Metal Hydride battery (option: parts
number RB1651)
(Guide to battery lifespan)
When alkaline batteries (1450mAh type) are used
HD Recording: about 4 hours
Notes
● When running the recorder on batteries, always set the
battery type in the preset menu to the correct setting for
the batteries used. (
☞
P.13)
1
Insert 8 batteries into the battery holder correctly as
shown in the diagram below, while paying attention to the
polarity displays (+: plus, and -: minus).
AA AA
Battery holder
2
Remove the battery case cover from the rear side of the
recorder.
Battery case cover